Things To Watch Out Use And Maintenance Technician Raised Floor.
17/08/2015
Raised floor is placed on a floor stand system. Due to the special nature of the floor structure, there are several points to note are as follows in the use of raised floor.
A. Preservation of raised floor
Before maintenance raised floor should preserve both structural and environmental exchanges. All raised floor panels are made to not need much maintenance to ensure the safety of operators and employees. Here are the requirements before preserving raised floor:
1. The structure:
* Check annual technical quality of raised floor.
* Change the position of the slab at least 2 times / year in public places if necessary.
* Check your vacuum system and the horizontal bar 2 times / year to know that the structure no matter what.
* If you feel the need to support the stand, call home construction.
* Replace the parts as necessary as copper grounding wire, bar, spacers.
* Replace the seat dented, distorted when detected.
2. Environment:
* Wipe the floor with a mop sponge plant daily.
* Vacuuming under the floor slab and at least 2 times / year.
* Wipe up ink patches wire or stain on the floor.
* Wipe the floor immediately if substances wire soft, sticky - note not purged floor
* Vacuum the carpet 3 times / week for anti-static mats.
* Clean the carpet on the floor (if any) at least 2 times / year.
* Clean frequently to reduce the floor too dirty condition.
* If the carpet on the floor, the carpet vacuumed 3 times in 1 week.
Place mats at the entry site to prevent dirt and debris entering.
B. Maintenance of raised floor
* When replacing the panel or move the panels that were mounted earlier, be careful to not dent or damage to the edges of the raised floor panels.
* The shape of the side panels allows moving and construction with specialized tools. Do not use your hands to lift the raised floor panels without dedicated tooling lift.
* Do not drop and kicked between the floorboards.
* Heavy tools should be put on 10cm × 10cm pads (wood / steel) to allocate the bearing point at the junction between the floor slabs. Installation of the base if necessary, in places heavy loads on the floor or on the floor plate cutting.
* When applying power lines, no more than 5 or about 3m slab lifted the first time to avoid misalignment of the floor when installing dat.Yeu this requirement applies to all types of floor structures heavy.
* The construction should pay attention when pulling the line to not become entangled in the stand. This can occur when power lines rubbing against the snails and snails likely to drop out of the system
* When you have spilled water to wipe immediately. Use dry mop to avoid water absorbent slip down as the support system as the horizontal bar and the stand will be rust and corrosion. Never pour water on the floor or detergent. This can cause damage to the slab and the impact on the wiring in the floor slabs are made duoi.Nhung is compressed by the high pressure, so it does not need much maintenance and can be easily cleaned by tree clean the house and can be cleaned periodically with a neutral soap if needed thiet.Khong wipe the oily rags and chemicals. Lining on the floor will be affected.
* If necessary, disinfect the contaminated surfaces disinfected with organic hard not catch fire. But if you do, be careful to not fall into the clean lines of the panels between the eyelid and can have adverse effects to the system beneath the floor.
* Do not place the gas pipe and water pipe under the floor system.
Nam Hoa Phat supplying raised floor installation, technical flooring, raised floor .... With a team of skilled technicians, experienced in many projects such as Techcombank, Vietcombank, Agribank, Plant Hyosung, Office CJ, Plant Ainomoto ... Nam Hoa Phat always bring quality projects and dedicated service.
For further information please contact:
Engineering Company Limited Nam Hoa Phat
Address: F13 / 2G, Road Union 5-6 Ap, Ap 6A, Vinh Loc, Binh Chanh, HCMC
Telephone: 08.6678.6605 - Hotline: 090101.9805 - Email: Info.namhoaphat@gmail.com
Website: Namhoaphat.com.vn